 |
Instructions:
Step 1: Fill the bottom of the planter with a thin layer (about 1/2 inch) of gravel. Succulent roots don’t like to sit in water. Since none of the planters I found had drainage holes I used gravel too raise the roots above where water would collect after watering. If you have planters with drainage holes you can skip this step.
Step 2: Fill the planter with potting soil up to an inch or two below the top of the planter.
Step 3: Plant succulents in planters. You can mix multiple types of succulents in each planter or use all the same.
Step 4: If there are spaces where the soil shows you can cover the exposed soil with flat rocks or even some of the gravel from step one.
You can get the materials from : amazon
